Monster Hunter series
Red scissor
How to make Big sword


Materials
[Materials for making pattern paper]
-Drawing paper 20piece
-Scotch tape(Sellotape) 5piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-"Lion Board(Koyo Soft Board)"
->5mm thick 100cm X 200cm
->10mm thick 100cm X 10cm
-Instant glue 10piece (It's convenient if there is also Instant gule Accelerator Spray)
-Hot melt(glue gun) 20piece
-PVC pipe(diameter 26.0mm) 1piece
-Wood stick 1piece

[Painting materials]
-"Bond G17"(one of liqud glue in Japan) 1000ml
-lacquer thinner 1000ml
-Paintbrush(Disposable premise ) 1piece
-Paper cup,bowl etc.(Disposable premise ) 1piece
-Bottle lacquer paint proper quantity
-Lacquer Spray proper quantity

Materials cost
10000Yen (about 100Yen = 1dollar)

Work time
37Hours

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Sizzer
-Box cutter(It's good to change "Pro blade". Moreover,It will become convenient if there is also "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw(Pipe cutter is also OK)
-Paint tools, such as a paintbrush

The following tools are not required, but are convenient when there is it
-Craft Knife

Spec
Weight 3kg
Length 230cm

Pattern paper data
I threw away the Pattern paper, so It's can't upload.

Attention at the time of work
-When it uses a thing including the thinner and the spray, wear a mask and make good ventilation.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner.

-When you toast mterials etc, make good ventilation. And don't breathe smoke.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make
Make ground plan by "Kousakuyousi"(one of hard paper in Japan).



Ground plan was completed.


Enflesh to ground plan by Drawing paper, and make Pattern paper.


Cut and paste and brings close ideal form.


Cut and paste and brings close ideal form.


Cut and paste and brings close ideal form.


Cut and paste and brings close ideal form.


Cut open.
Copy to new Drawing paper and make a fair copy.


Cut open.
Copy to new Drawing paper and make a fair copy.


Assemble fair copy again.


When you make ideal form, it's cut open.Let it be formal Pattern paper.
When you want to know how to make fundamental Pattern paper,watch this page.


Cut out materials based on a Pattern paper.
Cut out 5mm thick "Lion Board(Koyo Soft Board)".


***************************************************
It's Japanese most famous material for cosplay props.
It's a soft board, and it can be bended.(Details are here.)
And "Lion Board(Koyo Soft Board)" is sold only in Japan.

Then, if you live in except japan, you must use other materials.
A EVA board is usable in substitution for "Lion Board(Koyo Soft Board)".
It's called EVA foam, EVAzote, too.
Many world cosplayers are using EVA board.
(I don't know well about EVA board, sorry. Plase study by Google)
Or, basicly soft and can bended board is substitutes.
Then find the materials in your country.

I don't know material information of except japan.
Then you must call for help to your country cosplayers, if you know more information of materials.
There are many world cosplayers in Worldcosplay.
Please find your contry cosplayer by this site. And ask them.
http://ja.worldcosplay.net/

Or, ask japanese material shops that the shop can send "Lion board" to your country.
Thease are shops selling "Lion board".
http://www.rakuten.ne.jp/gold/cosprop/ This site has Japanese page only.
http://www.tokyu-hands.co.jp/foreign.html This site has English page too.
*******************************************************************************************

-------------------------------------------------------------------------------------------
【5mm厚】通常&特大サイズ - 基本のサイズ、複数枚セットで買うとさらにお得


【5mm厚】ハーフサイズ-少しだけ使いたい場合にオススメ

-------------------------------------------------------------------------------------------

*******************************************************
At first, use sharp blade. For example, "Pro Blade".
This is so sharp.
In addition, use big size Box cutter.
Big size can cut well more than small size.
←10枚入り ←50枚入りお得パック

When you cut, put "Lion Board(Koyo Soft Board)" on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Craft Knife, if you cut small ornaments etc Craft Knife can't cut well.

*******************************************************************************************

Paste together with Instant glue.
Use Instant gule Accelerator to make good progress.


*********************************************
Instant glue can plane surface easy.
But it can't narrow surface well.
Then you should use bellow spray.
I always use this.
Watch movie.

For example, use bellow surface.


Instant gule Accelerator
This can stick surface in several seconds.
100ml can stick one armorset or about three weapons..
←100ml ←180ml ←420ml

About instant glue
General liquid Instant glue is OK.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can stick too. It's can stick narrow surface too.
But it's take time more than Instant glue and Instant gule Accelerator.
And "Bond G17"(one of liqud glue in Japan) may melt stuck surface if you use "Bond G17" painting.
(You should reinfore stuck surface with Instant glue. Or use Gesso painting.)
After all Instant glue and Instant gule Accelerator is the best.

*******************************************************************************************

Paste together with Instant glue.


Paste together with Instant glue.


Paste together with Instant glue.


Insert a wood stick.
Paste with Hot melt(glue gun).


Pasting was completed.


Make a tip parts
Cut out materials based on a Pattern paper.
Cut out 5mm thick "Lion Board(Koyo Soft Board)".


Paste together with Instant glue.


Pasting was completed.
The tip parts can put on and take off.


Mark by penn.


Shave with Box cutter.


Make a grip.
Use PVC pipe(diameter 26.0mm).
Cut PVC pipe. PVC pipe can be cut by saw. But Pipe cutter is more bettr.Pipe cutter can cat quickly and beautifull.



Cut one side slant.


Paste with Hot melt(glue gun).


Cut out 10mm thick "Lion Board(Koyo Soft Board)".
Paste together with Hot melt(glue gun).

-------------------------------------------------------------------------------------------
【10mm厚】通常&特大サイズ - 基本のサイズ、複数枚セットで買うとさらにお得


【10mm厚】ハーフサイズ-少しだけ使いたい場合にオススメ

-------------------------------------------------------------------------------------------

Cut out 10mm thick "Lion Board(Koyo Soft Board)".
Paste together with Hot melt(glue gun).


Cut out 10mm thick "Lion Board(Koyo Soft Board)".


Paste with Hot melt(glue gun).


Make prickles.
Cut out 5mm thick "Lion Board(Koyo Soft Board)".
Paste together with Instant glue.


Paste with Hot melt(glue gun).
Write pattern with Hot melt(glue gun).


Make surface like crabs.
Make Broke piece of "Lion Board(Koyo Soft Board)" scrap.
Mix scraps and "Bond G17"(one of liqud glue in Japan).



Paint mixed one twice with brush.
Don't use fire after painting until drying. Don' use Lighter etc until drying.
The parts will be charred in seconds.
However don't paint to parts made by Plastic sheets.
Desiccate for 4 or 5 hours.(It may become dry for 1 or 2 hours, but Desiccating for 4 or 5 hours is better.)


Paint red part roughly with Lacquer Spray


Paint red part roughly with Lacquer Spray.


Paint white part roughly with Lacquer Spray


Paint boader of color with Airbrush politely.

←初心者にもオススメのセット、管理人も使ってます。

Painting was completed.


Below are completed things.
















Return to Top page

Profile

MAIL コスプレ



Please share my site
I'm so glad, if you share my site by your site, blog, twitter, facebook etc.

URL - http://gyakuyoga.hobby-web.net/
Site name - GYAKUYOGA